You have arrived at the right place if you are searching for information on what to do in regards to ignition cylinder problems. We are Strongsville Locksmith and we are based in Strongsville, OH but we are confident that no matter where you live, you will find this information to be helpful. Anyone, anywhere can end up having problems with their ignition cylinder. And now you will know what to do! So, if you arrived here because you were searching for something along the lines of:
“My key is stuck in the ignition cylinder!”
“My key is jammed in the ignition cylinder”
“My key broke off in the ignition”
Then you are in the right spot.
You need automotive locksmith advice to help out with these situations. Ignition cylinders are built to be strong, but that doesn’t mean that they will last forever or that problems will never arise. Have a look at the following issues and see if any of them match what you are dealing with.
Ignition Cylinder Problems These are all scenarios that our team is frequently called for.
- The key has broken off inside the ignition cylinder.
You might have a key that has broken inside of the ignition cylinder, or it might simply be stuck. Here is what you can do if it is stuck. Make sure your wheel is in the right position. Turn it gently from side to side, while very gently pulling the key. Sometimes, it is only stuck because of the position of the steering wheel! You will likely have an “ah ha” moment when you pull it out, but in a state of panic, it can be difficult to remember to do this. If, on the other hand, the key has broken off inside, it is a good idea to get on the phone with a locksmith. You can end up doing more damage if you try to force the key out.
What might start out as the need for broken key extraction could turn into the need for ignition cylinder replacement. Let’s avoid this, if possible!
- The car doesn’t immediately start.
You should be able to start your car simply when you turn the key. But if this isn’t happening, then check to ensure your battery isn’t dying. Push down on the accelerator in an attempt to give the car gas, and see if it starts then. You should be able to pinpoint if you just have a low battery or not. In some cases, the issue is in fact the ignition cylinder. Not to worry, a locksmith can replace it.
- The vehicle does not start at all.
Did you already pull out the jumper cables? Did you try giving the car some gas while attempting to turn the key? If you have gas, and the battery isn’t dead, contact a locksmith. An expert will be able to tell you if the problem is the ignition cylinder.
Get on the Phone with a Locksmith: Ignition Cylinder Replacement
Lock and security providers know what they are doing when it comes to keys and locks. Sure, you can visit your mechanic or local dealership but it is likely that the cost will be much higher. Don’t try to save money by working on the ignition cylinder yourself if you don’t have the proper experience. This will only lead to further damage, which in turn will lead to you having to spend more money than necessary. No one wants to do this. Reach out to a locksmith when you think you need an ignition cylinder change. This is an automotive locksmith solution that many local lock and security businesses will offer.
How to Prevent Ignition Cylinder Problems
You can’t always stop ignition cylinder problems from occurring, but you can try to prevent them by doing things like keeping the ignition cylinder clean and free of debris and dirt… Read more of this article here